Skip to Content

How to Make Stretchy Beaded Bracelets with Elastic Cord

This post may contain affiliate links.

Making stretchy beaded bracelets is a fun and popular jewelry-making project. Stretch bracelets are so easy and quick to make, so they’re the perfect craft activity to do with children and grownups alike.

This step-by-step tutorial will teach you everything you need to know to make a stretchy seed bead bracelet that you can enjoy for a long time. If you’re ready to learn more about making DIY bracelets, keep reading.

seed bead bracelets with letter beads and a tray of rainbow colored beads

Stretchy beaded bracelets are the perfect beginner jewelry-making project. It’s a quick, simple project that’s well-suited to novice crafters who want to get started with jewelry design. 

Beaded bracelets are a great addition to any jewelry wardrobe. They’re colorful, customizable, and really comfortable to wear. Plus, they make great gifts for friends, family, and teachers, too.

So, if you’re ready to learn how to make beaded bracelets, keep reading! 

This jewelry-making tutorial will teach you how to make stretchy beaded bracelets with an elastic cord. All you need is a handful of beads, some basic tools and materials, and the right instructions. With just a little practice, you can make an armful of new bracelets in no time at all!

supplies to make stretchy bracelets with rainbow seed beads and black and white letter beads

How to Make Stretch Bracelets

Making bead bracelets is a pretty simple project, but the right supplies and tools will make it even easier. Here are the best bracelet-making materials you’ll need to ensure the project turns out well – and your bracelets last for a good, long time.

Stretch Bracelet Supplies

  • Elastic beading cord
  • Beads. I’m using seed beads for this tutorial, but you can also use plastic pony beads.
  • Beading tray
  • Bead stopper (If you don’t have a bead stopper, you can use a binder clip of a small piece of tape.)
  • Large eye beading needle (If you don’t have a beading needle, you can use a small length of beading wire, folded in half.)
  • Jewelry glue, such as G-S Hypo Cement
  • Crimp bead covers (optional – I’ll explain more below)

Types of Beads

You can make elastic bracelets with almost any type of beads, from small beads to larger beads. You can use letter beads to personalize your bracelets, and even add charms to them if you want.

In general, choose lightweight beads with smooth edges (so they won’t that won’t fray the elastic cord.) Here are some good choices:

  • Plastic beads, like mini pony beads and letter beads, are cute, colorful, and inexpensive. They’re ideal for beginners or kids’ craft projects. They have larger holes, so they are easy to string on the elastic thread.
  • Glass beads come in all different colors, sizes, and shapes. You can use seed beads too, as long as the size of the hole is larger enough to fit your stretch cord.

Here’s a tip: Select your beads before choosing your cord, and then buy the largest diameter cord that will fit through the beads.

Best Stretch Cord for Bracelets

Stretch bracelets are made by stringing beads onto a stretchy elastic cord. The elastic cord stretches like a rubber band, making the bracelets easy to put on and take off.

There are several varieties of elastic bead cord. Choose from this list to find the best elastic string for your particular project.

  • Stretch cord. The most common type of elastic cord is a rubbery, single-strand cord with a round cross-section. It comes in a variety of sizes and colors, including a clear cord and black cord. The most popular brand of stretch cord is called Stretch Magic.
  • Stretch floss, aka stretch fiber. This type of elastic is a strong, fibrous, flat cord. It’s less likely to stretch out over time, and it’s easier to knot than single-strand cord. However, since it’s made from multiple strands of stretchy material, it can fray.
  • Fabric-covered elastic cord. This type of stretch cord comes in a wide variety of colors and sizes. It’s typically thicker than other elastic cords – so you’d need to use large-hole beads. 

In my opinion, Stretch Magic Cord is one of the best all-purpose stretchy cords to use for bracelet making. It’s strong, durable, widely available in craft stores.  

What size stretch cord to buy?

You can buy elastic cord in a few different thicknesses. Thicker elastic, such as 1mm diameter, is sturdy and suitable for larger and heavier beads like gemstone beads. Thinner elastic, such as .5mm diameter, is suitable for smaller beads, like delicate Czech glass beads.

seed bead bracelets with letter beads and gold embroidery scissors

How to Make Stretch Bead Bracelets

Here is a complete tutorial on how to make beaded bracelets with elastic cord.

Prepare your materials.

Gather your beads, elastic cord, scissors, and glue.

Measure your wrist, so you know what size bracelet to make. For reference, a small adult wrist is 7″ around, a medium wrist is 8″, and a large wrist is 9″.

Jewelry-making tip: A bracelet made from larger-diameter beads will feel tighter than the same-sized bracelet made from smaller-diameter beads, like seed beads. If you are using large beads, you may need to add a little extra length to your bracelet.

Cut the elastic to length.

I like to use a double strand of elastic to make stretch bracelets. A doubled cord gives the bracelet extra strength, so it will last for a good, long time.

Cut a length of cord that’s twice as long as your wrist measurement, plus 12 inches. In other words: measure your wrist circumference, multiply by two, and add 12 extra inches. 

Remember, it’s always better to cut a piece of elastic that’s too long and trim away the excess cord later.

Prestretch the elastic cord.

Pre-stretching the elastic prevents it from stretching out over time as you wear the bracelet. Hold a four-inch length of elastic between your fingers, and stretch it out a few times. Move down the length of the cord to the next section, and repeat. Keep going until all parts of the elastic cord get stretched.

Secure the end of the cord.

Fold the cord in half, so you’re working with a doubled length of cord. 

If you are using a beading needle, add it to the folded end.

Place a bead stopper or binder clip on the cord ends so that the beads don’t slide off as you string them. If you don’t have a bead stopper or binder clip, you can fold a small piece of tape around the ends of the cord.

masking tape wrapped around the ends of elastic beading cord to act as a cheap bead stopper

Lay out your beads.

Arrange the beads in order before you start to string them on the elastic cord.

I like to use an inexpensive beading tray to organize my beads. A beading tray is a small velvet-textured design board with U-shaped channels marked with inches and centimeters. Beading trays are great for keeping your beads from rolling around the table while you plan your design.

String the beads onto the cord.

If the holes of the beads are large enough, you may string them by hand. Hold the end of the cord in one hand, and use your other hand to place the beads onto the cord.

If the bead holes are smaller, you may need to use a needle to make stringing easier. Many people recommend these large-eye beading needles. If you don’t have a beading needle handy, you can fold a small piece of beading wire in half to create a makeshift beading needle.

a folded piece of jewelry wire used as a beading needle to string colorful pony beads onto elastic stretch cord

In either case, try to put the bead with the largest hole on the cord first. (Once we get to the finishing step, I’ll show you how to hide the knot by sliding it into the center of that bead.)

Keep adding beads until you have enough. Check the length periodically by wrapping the strung beads around your wrist. You don’t want it to be too tight or too loose.

Tie a knot to secure the beading cord.

Once you’ve added enough beads, knot the ends of the elastic cord together. 

Remove the bead stopper and needle from the elastic cord. Carefully, bring both ends of the cord together. Place one of the free ends through the folded end. Now, you’ll tie a knot with the two free ends.

Instead of tying a regular overhead knot, I prefer to secure the ends of the cord with a surgeon’s knot. 

Making a surgeon’s knot is easier than it sounds. It’s very similar to a square knot, except you’ll loop the ends over twice instead of once. This extra pass makes the knot more durable. 

a black and white illustration diagram showing how to tie a surgeon's knot

Make the first half of the surgeon’s knot, and pull on the ends of the cord to remove slack in the bracelet. 

Hold the first half of the knot in place, and tie the second part of the knot. Pull the knot tight without letting go of the tension in the bracelet.

Secure the knot with glue.

Hold the beads away from the knot, and apply a small dab of glue to the knot.

seed bead bracelets with letter beads and a tray of rainbow colored beads and glue

For jewelry projects, I recommend using flexible, fast-drying glue, such as G-S Hypo Cement or E6000.

I don’t recommend super glue since it can be brittle when cured and abrade the elastic cord over time. For the same reasons, avoid using clear nail polish as glue (even if you see other tutorials recommending it). It may be convenient, but it won’t last long.

Hide the knot.

There are a few ways to hide the knot, so it’s doesn’t distract from the design of your finished bracelet.

Hide the knot inside a bead.

The simplest way is to slide the knot into the hole of one of the neighboring beads. This only works if the bead hole is large enough to accommodate the knot. (That’s why I told you to put the bead with the largest hole on the cord first so that it would be next to the knot.)

To do this, apply a small dab of glue to the knot. Then, while the glue is still tacky, slide the adjacent bead over the knot. Let the glue dry.

Let the glue dry before trimming the ends of the cord. Jewelry glues dry in about an hour but takes up to 24 hours to fully cure.

Once the glue has dried, gently stretch each cord end, and use small sharp scissors to trim the excess cord as close to the bead as you can.

trim the excess stretch cord with gold scissors

Alternative: Hide the knot with a crimp cover.

If the knot doesn’t fit into the hole of the adjacent bead, you will need to conceal it in another way. You can hide the knot by covering it with a crimp bead cover. For this project, I suggest a 4mm or 6mm crimp cover.

Tie the knot as usual, and add a small dab of glue to secure it. Slip a crimp cover over the knot so that the knot is inside the crimp cover.

Use a pair of chain-nose pliers (or other small pliers) to squeeze the crimp cover until the edges meet and the cover is completely closed.

Once the glue has dried, trim the excess cord with scissors or flush cutters.

Note: Be careful here. We’re talking about crimp covers, not crimp beads. Don’t use a crimp bead to secure the elastic cord! If you compress a metal crimp bead on elastic, it can cut through the soft cord.

How to Make Stretchy Bracelets that Won’t Break

Here are some tips that I’ve found to make durable stretch bracelets that won’t break.

  • Choose a high-quality stretch cord, like Stretch Magic Cord or Opelon Stretch Fiber.
  • Use doubled elastic if the bead holes are large enough.
  • Tie the elastic with a surgeon’s knot instead of a simple overhand knot.
  • Secure the knot with a drop of glue, and wait for it to dry. Remember that jewelry glue takes up to 24 hours to cure completely. Ideally, you will want to until the next day to wear your new bracelet.
  • When you put the bracelets on, roll them onto your wrist instead of stretching them over your wrist.
4 seed bead bracelets with letter beads on a wrist

More Jewelry Making Tutorials

If you like making DIY jewelry, I think you’ll enjoy these other tutorials and free patterns.

Have questions? Join the Facebook Group!

We hope this article was useful for you! If you have any additional questions, feel free to join my Facebook Group. We created this group for you to share pictures, ask questions, and help each other out.

What’s Next?

Pin this post: Save this tutorial to your Pinterest boards so that you can come back to it later.

Leave a comment: We love to hear your feedback. Tell me in the comments below!

Share on Instagram or Facebook: When you make this project, share it on social media and tag me @sarahmaker_. We love to see what you make!

How to Make Beaded Bracelets with Elastic

How to Make Beaded Bracelets with Elastic

Yield: 1
Prep Time: 5 minutes
Active Time: 10 minutes
Total Time: 15 minutes
Difficulty: Easy
Estimated Cost: 5

This step-by-step tutorial will teach you everything you need to know to make a stretchy beaded bracelet with elastic cord and colorful beads.


  • Elastic beading cord
  • Seed beads or pony beads
  • Jewelry glue
  • Crimp bead covers (optional)


  • Beading tray
  • Large eye beading needle
  • Bead stopper


  1. Measure your wrist. Cut a length of cord that’s twice as long as your wrist measurement, plus 12 inches.
  2. Pre-stretch the elastic cord. Fold the cord in half to make a doubled length of cord. Secure the ends of the cord with a bead stopper or piece of masking tape.
  3. Arrange the beads in a beading tray. Using your hands or a beading needle, string the beads onto the cord. Periodically check the length by looping the cord around your wrist.
  4. Once you've added enough beads, remove the bead stopper and the needle. Loop one of the free ends through the folded end. Pull the free ends to move the folded end closer to the beads.
  5. Tie the ends together with a surgeon's knot. (A surgeon's knot is similar to a square knot, with an extra pass-through. See the diagram.)
  6. Hold the beads away from the knot, and apply a small dab of glue to the knot. While the glue is still tacky, slide the adjacent bead over the knot.
  7. Let the glue dry completely. Trim the excess cord with small, sharp scissors. (f the knot doesn’t fit into the hole of the adjacent bead, you can conceal it with a crimp cover.)


  • Remember that jewelry glue takes up to 24 hours to cure completely. Ideally, you will want to until the next day to wear your new bracelet.
  • For more information about how to tie a surgeon's knot, see the diagram in the post above.

Did you make this project?

Please leave a comment on the blog or share a photo on Instagram


Thursday 9th of May 2024

Hi would a hot glue gun be ok instead of jewellery glue?

Sarah Stearns

Friday 10th of May 2024

I wouldn't recommend it.


Tuesday 27th of February 2024

Hi Sarah! I want to use wood beads and bead tubes. Will the bracelet be ok if I double the thread with wood beads?

Sarah Stearns

Wednesday 28th of February 2024

Yep, that sounds fine!

Linda Taylor

Tuesday 27th of June 2023

Hi Sarah! This is an excellent tutorial. Seed beads sold in bead stores are more expensive but are more uniform in size and shape which, in my opinion, gives a better product. You can buy them in craft stores but in my experience I found the shape and size so inconsistent that I threw many of them out; they didn’t “sit” together well. The 6/0 size is about 4mm and the 8/0 size about 3mm. The Japanese companies make the best (Miyuki or Toho). I also double the cord but use 0.5mm almost exclusively. That’s because as a rule gemstone beads cannot accommodate a 0.7 or 0.8mm doubled unless it’s a “large hole” bead. These are also available at bead stores. My local store has large hole pewter beads as well and I sometimes use one in the back (beginning of stringing) to hide the knot since closing the crimp cover correctly can be a challenge, especially for the beginner. I wish your tutorial was available when I was learning! This is an excellent tutorial for learning the “how to” of stretchy bracelets.

Sarah Stearns

Tuesday 27th of June 2023

Hi Linda, Thank you for your comment and your tips! That's great information to know about the beads and the cord.


Wednesday 31st of May 2023

How do u know how much cord to leave at the ends so u have enough to make a knot?

Sarah Stearns

Thursday 1st of June 2023

I recommned cutting a piece of string that's long enough to go around your wrist, plus an extra 12in for making the knot.


Monday 22nd of May 2023

Hi! Thank you for the great tutorial! I’ve had some bracelets snap and I’m wondering where I possibly went wrong… I’m working with 0.8 mm crystal string, seed beads, and 3mm “crimp bead covers” nearly the same as the one linked in your tutorial. I’ll tie the knot (without cutting the ends), apply some glue, let it sit for a minute, then add a crimp cover to the knot and let it dry. Just wondering if I’m adding the crimp too early, if the crimp is too small, if it’s too sharp for the elastic, or if I simply tried on the bracelet too early (it hadn’t been 24 hours yet)… any suggestions? I’ve made 24 bracelets and want to make sure I’m not making a critical error before moving forward! Thank you so much!


Monday 25th of September 2023

@Kristine, i like it too


Monday 22nd of May 2023

@Sarah Stearns, Thank you for the quick reply! It does appear to snap right by the knot area so you're right, probably the crimp covers. Bummer because they looked really cute! I'll try some without the covers and look into finding larger beads to hide the knot. Thank you for the advice!

Sarah Stearns

Monday 22nd of May 2023

Hi Kristine, My first instinct is that it may be the crimp covers. When you look at the ones that have broken, can you tell if they've snapped at the knot area? It might be worth waiting to add the crimp covers and see if that changes your results. Another way to hide the knot is to add a dot of glue and pull it inside a slightly larger bead to dry.

Skip to Instructions